Content Query syntax

From Sense/Net Wiki
(Redirected from Query syntax)
Jump to: navigation, search
  • 60%
  • 6.0
  • Enterprise
  • Community
  • Planned


Sense/Net uses the Lucene search engine for indexing and searching for content. We fully support the original Lucene syntax, but extended it with our own keywords for sorting and filtering, thus forming the content query language (CQL). For the overview of the concept of querying in Sense/Net, visit the Content Query page.

Almost everywhere in the portal if you come across a search box - e.g. on the main search page, portlet property window or launching the Content Picker - you can use the Content Query Language.

Developers can use this syntax with the Query API when they create a portlet or application.

Basic search

In most cases you want to look for a single term or a phrase, which is a group of words surrounded by double quotes ("apple pie"). In these cases Sense/Net will look for contents that have these words in their default index data that contains all the relevant text of the content.

In more complex situations you may need some filtering based on the type or place of the content you are looking for, or you want to search in a specific field. In this page you can learn how to construct more complex queries that you can use to effectively find content in a huge repository.

Wildcard search

We support single and multiple character wildcard searches within single terms.

Symbol Example
 ? single character wildcard search tru?k returns content containing truck or trunk
* multiple character wildcard search app* returns content containing apple or application

Fuzzy search

We can search similar words based on Lucene's Fuzzy search. Fuzzy search is a simple term followed by "~" and a small number (0 < n < 1). Fuzzy search uses Levenshtein or Edit Distance algorithm in depth. Example:


With this query you can find documents that contain a word with one different character from "abbreviate" e.g. abreviate, sbbreviate etc.

Proximity search

It is possible to limit the distance of the relevant words in the result documents. The proximity search is two word in quots and followed by "~" and a positive whole number. This number defines the maximal count of words between the given two word. Example:

Description:"Lorem amet"~3

This query will find the following text: "Lorem ipsum dolor sit amet" because there is 3 words between "Lorem" and "amet".


When performing a search you can specify the field you want to search in. In the previous cases Lucene used the default field called _Text, which contains all relevant data of a content. If you search for apple, it is the same as _Text:apple.

You can name any existing field, the syntax is FieldName:VALUE.


There are a few special field types that have their own syntax for defining the query term. For example DateTime:

ModificationDate:>'2010-09-01 12:00:00'

If you want to know more about how fields are indexed, visit the Field Indexing article.

Common search-related fields

Sense/Net has lots of built-in fields that you can use to make more precise queries. These fields are related to type or place of the content:

InTree Returns the given folder and all contents under it InTree:"/Root/MyContent"
InFolder Returns all content in that particular folder InFolder:"/Root/MyContent/Media"
Type Returns all content that is of the given type Type:Article
TypeIs Returns all content that is of the given type or any subtype TypeIs:WebContent

It is usually advised to use quotation marks when querying paths, since paths containing spaces and other special characters like '-' or '_' could cause trouble and "split up" the expression into two separate expressions instead of handling it as one query for path.

Content List fields

It is possible to execute a query that contains a condition for Content List fields. The syntax of this is the following: you have to use the # sign when searching for a content list field. For example if there is a Document Library with the added field Contract type, the query will look like:

+InFolder:/Root/MyContracts +#ContractType:FixedPrice

Another example for a date query:

+TypeIs:CustomContract +#ContractDeadline:<'2011-09-01 12:00:00'


In Sense/Net query language there are several keywords that you can use to make the query more specific, define ordering or paging.

All keywords must be specified using the following syntax: .KEYWORD:VALUE

  • starts with a dot (.)
  • uppercase
  • followed by a colon and the value


Two keywords exist for defining sorting in a query text:

  • SORT

You can use both to name one or more fields. Results will be returned in the given order (ascending or descending, depending on the given keyword).

InFolder:/Root/MyContents .SORT:DisplayName
InFolder:/Root/MyContents .REVERSESORT:CreationDate .REVERSESORT:Index

Please note that sorting works on the indexed fields of the content that the query is executed on. This means you cannot sort the results based on a referenced content's fields. For example it is not possible to sort books based on the referenced authors' country. Developers have the following options:

  • sort the results in memory on the server or on the client side after the query got executed
  • create helper fields on the Book content type that index the metadata of the Author only for the purpose of sorting. E.g. add an AuthorCountry field that stores the referenced author's country and can be used for sorting books. But this solution kind of beats the purpose of having reference fields because you have to maintain consistency across metadata changes: for example reindex book content when the author's country is changed.


Operators allow terms to be combined through logic operators. Lucene supports AND, "+", OR, NOT and "-" as Boolean operators (boolean operators must be ALL CAPS like keywords).

The OR operator is the default conjunction operator. This means that if there is no operator between two terms, the OR operator is used. The OR operator links two terms and finds a matching document if either of the terms exist in a document. This is equivalent to a union using sets.

apple OR melon


The AND operator matches documents where both terms exist anywhere in the text or fields of a single document. To search for content that contains the words apple and melon in the field Ingredients, use this query:

Ingredients:apple AND Ingredients:melon


The + or required operator requires that the term after the "+" symbol exist somewhere in a the field of a single document.

To search for content that must contain "apple" and may contain "melon" use the query:

+apple melon


The NOT operator excludes content that contain the term after NOT. It cannot be used with only one term.

apple NOT melon


The "-" or prohibit operator excludes documents that contain the term after the "-" symbol.

To search for content that contain "apple" but not "melon" use the query:

apple -melon


Lucene supports using parentheses to group clauses to form sub queries. This can be very useful if you want to control the boolean logic for a query.

(lime AND apple) OR melon


One of the most important things when writing queries is paging. In most cases you will not need all of the content but only a few of them that you can present on the UI.

If you want to display only the first 5 content, you can use the keyword TOP:

InFolder:/Root/MyContents .TOP:5

Always use the TOP keyword whenever limiting result count is possible. TOP limits the size of temporary result arrays used in background query execution logic. Not providing .TOP keyword may result in unnecessary memory consumption and unreasonably high intensity GC usage! See Query Optimization for details.

In case you want to display a few content but not the first ones (for example in a box showing related articles or you create a user interface that lets the user choose a page), use the keyword SKIP. The query below will skip the first 3 results and will return the second 3:

InFolder:/Root/MyContents .SKIP:3 .TOP:3

Range search

Range queries allow one to match documents whose field(s) values are between the lower and upper bound specified by the range query. Range queries can be inclusive or exclusive of the upper and lower bounds. As you can see in the examples below, the two types can be mixed.

  • [...TO...]: inclusive (the lower and upper bounds are included)
  • {...TO...}: exclusive (the lower and upper bounds are NOT included)
CreationDate:['2010-08-30' TO '2010-10-30']
CreationDate:{'2010-08-30' TO '2010-10-30'}
CreationDate:['2010-08-30' TO '2010-10-30'}
CreationDate:{'2010-08-30' TO '2010-10-30']

Filter keywords

Sense/Net has several types of filters that automatically filter the results. These filters are switched ON by default, but you can decide to switch them off.


If Autofilters is on, result list will not contain system or deleted content. For example content in (apps) or any other system folder will not be returned. If you want to switch this filter off, do it this way:


The following content will be filtered out from the results if Autofilters is on:


In some content management scenarios contents have lifespan information. This means the content is created but will be valid or available only on a defined date in the future and it may become invalid on another date.

Lifespan filtering is turned off by default. If you want to get results depending on the lifespan status of content, you can switch this filter on:

Type:Article .LIFESPAN:ON

Quick queries

(from version 6.5.4)

When content items are being created or changed, these changes need to be updated in the index. In cases when it is not necessary for the query results to reflect these changes immediately, you can perform quick queries that will be executed without making the index reader up-to-date. For details please visit this article:

CQL syntax for executing a quick query:

Id:<42 .QUICK

Template parameters

You can use parameters in your query text that will we be replaced by the current portal environment. This lets you save a dynamic query. For example it is possible to present the top 5 news of the day or listing the content modified by the currently logged in user.

The usage of the parameters is easy: just put them into the query between double @@ signs:


These are the built-in parameters that you can use in your queries:

CurrentUser Represents the currently logged in user
CurrentDate Current date, meaning the very start of the day, e.g.:9/17/2010 00:00:00
CurrentTime Current time, e.g.:10/23/2010 14:30:00
CurrentMonth Current month
CurrentContent Current content
CurrentWorkspace Current workspace
CurrentSite Current site

From version 6.5.2 there are many new template names that you can use:

Today Equivalent to CurrentDate and CurrentDay: represents the start of the current day (00:00 AM).
Yesterday Start of the previous day.
Tomorrow Start of the next day.
CurrentWeek Start of the current week. This builds on the first weekday defined by the current culture (which is Sunday in some cultures, Monday in others).
CurrentMonth Start of the current month.
CurrentYear Start of the current year.
NextWorkday Start of the next workday. It skips weekends but it does not know anything about holidays.
NextWeek Start of the next week. This builds on the first weekday defined by the current culture.
NextMonth Start of the next month.
NextYear Start of the next year.
PreviousWorkday Start of the previous workday. It skips weekends but it does not know anything about holidays.
PreviousWeek Start of the previous week. This builds on the first weekday defined by the current culture.
PreviousMonth Start of the previous month.
PreviousYear Start of the previous year.

Templates with properties

If the parameter represents another content (like CurrentUser or CurrentWorkspace), you can use any field of that content by naming it after the parameter and a dot (. sign):


Please note the quotation marks around the template. Since a path may contain characters like '-' that are special characters in the query language, it is best to put templates like this inside quotation marks.

From version 6.5.2 multiple properties can be chained:


Template expressions

From version 6.5.2 you can use simple value modifiers (a '+' or '-') on template values (e.g. dates or numbers). This is extremely useful in case of dates, when you want your query to contain dates in the past or future. You may use any one of the date templates above, or any content property that is a date or number.


The following, method-like syntax also works (the units - like days or months - are the same as above, they are just part of the method name):


The following list contains the units you may use in an expression (with a shortcut in parenthesis if exists):

seconds (s), minutes (m), hours (h), days (d), workdays, months, weeks, years (y)

For developers: it is possible to define your own query template parameters by writing a custom query template replacer.

Inner query

There are cases when you want to filter content by their reference fields. For example you want to look for books whose authors live in the UK. This query cannot be designed as a simple query for books, because the origin of an author is stored (therefore indexed) on the author content. First you'll have to collect all the authors that live in the UK than execute a second query for books of these authors. This is where inner query comes in: it is possible to construct and execute a query like this in a single, compact statement.

+TypeIs:Book +Author:{{+TypeIs:Author +Country:'UK'}}

Note the parenthesis' in the example above. Inside there is a regular query for authors - that is what we call inner query. When you execute a query like this, the system executes the inner query first and it results in a list of authors (that live in the UK). Their id will be inserted automatically into the outer query as an OR expression:

+TypeIs:Book +Author:(11 22 33)

So every inner query will actually mean executing two queries: first the inner query (or queries) than the outer one. This is the way you can construct queries described above.

Please note that this type of query works only when executed from source code (using the Content Query API) or through OData. It does not work in an environment when the query will go through a LINQ to Sense/Net execution pipeline - for example smart folders or portlet properties cannot contain inner queries.


Content queries may contain comments. A comment is useful for explaining the query or adding metadata to it. Line and block comments also can be used. The line comment starts with a double slash ("//") and ends with line feed or EOF.

InTree:"/Root/(apps)" // Search under the specified location

A block comment starts with the "/*" characters and finishes with the "*/" characters and can contain a line feed too.

** this is a big block comment
**    written by John Smith
/* Only in the global apps */ +InTree:"/Root/(apps)"
/* Only specific types     */ +TypeIs:SystemFolder

A block comment can be placed anywhere where a whitespace is allowed but the following example is a bad practice:

InTree:/*bad practice*/"/Root/(apps) //avoid block comment in the middle of a term"

Unterminated block comment does not throw an exception but try to avoid this case.

InTree:"/Root/(apps)" /* Unterminated block comment

A comment wrapped in quotation marks or apostrophes behaves as a string. The following query will be parsed as a wildcard query that contains four terms:

Body:"Lorem ipsum /*dummy text*/"

Escaping Special Characters

Lucene query supports escaping special characters that are part of the query syntax. The current list special characters are

+ - && || ! ( ) { } [ ] ^ " ~ * ? : \

To escape these character use the \ before the character. For example to search in a folder called (5+5-3), you can use the query:


You can also create phrases by putting the " character around words. So if you want to search for (1+1):2, you can use the query:


Using keywords and operators in term values are also possible if the term value is wrapped by quotes (or apostrophes):


Missing quotes causes InvalidContentQueryException in this case.

Related links